7.5.2 Changing the tilt of the activated levelling unit
1.
Pull out the linch pins and pins on the two outer
holders of the levelling segments.
2.
To adjust the the levelling unit at a steeper
angle,
turn the levelling segments to the rear until the
desired steeper tilt is reached
CMS-I-00006929
or
To adjust the the levelling unit at a flatter angle,
turn the levelling segments to the front until the
desired flatter tilt is reached.
CMS-I-00006930
3.
Secure the levelling segments with pins and linch
pins.
7.5.3 Adjusting the side closers
7.5.3.1 Adjusting the horizontal position of the side closers
The horizontal position of the side closers is adjusted
to prevent the formation of soil ridges during
operation.
CMS-T-00010401-A.1
CMS-T-00009942-A.1
CMS-T-00009943-A.1
7 | Using the implement
Using the levelling unit
MG7478-EN-GB | C.1 | 19.08.2022 | © AMAZONE
68