Adjustments
Citan BAG0014.4 09.14
87
8.5.3
Calibration test of the Citan with full electric metering
Preparing the calibration test:
1. Fill the seed hopper with seed (200 kg,
correspondingly less for fine seeds at fine
seeds.
2. Take the seed collecting tray out of the
transport retainer on the hopper rear wall.
3. Slide the seed collecting tray (Fig. 74) into
the bracket.
Place one seed collecting tray underneath
every individual metering unit.
Fig. 74
4. Open the injector sluice flap (Fig. 75/1) on
all metering units.
Fig. 75
Danger!
Danger of squeezing
when opening and closing the injec-
tor sluice flap (Fig. 75/1).
Only hold the injector sluice flap on
its strap (Fig. 75/2). Danger of injury
when the sprung loaded flap shuts
(Fig. 75/1).
Never ever reach with your hand
between the injector sluice flap
(Fig. 75/1) and the injector sluice!
Additional details: refer to the oper-
ator's manual AMATRON 3.
After the calibration test:
1. Close the injector sluice with special care.
2. Secure the calibration trays on the hopper
rear wall with the aid of a lynch pin.
