Maintenance, repair and care
136
Citan BAG0014.4 09.14
12. Attach foam rubber insert (Fig. 145/1)
13. Attach distributor inner hood (Fig. 145/2)
14. Attach the ring (Fig. 145/3)
15. Attach distributor outer hood (Fig. 145/4)
16. Check the tramline control for proper func-
tion.
Fig. 145
12.10
Seat shaft bearings
Seed shaft bearings:
Slightly apply oil to the seating of the seed shaft
bearings by using a light mineral oil (SAE 30 or
SAE 40).
Fig. 146
12.11
Check the oil level inside the Vario gearbox
Oil change not necessary.
Check the oil level inside the Vario gearbox:
1. Park the machine on level ground
2. The oil level must be visible in the oil gauge
window (Fig. 147/1) of the Vario gearbox.
3. Check the Vario gearbox for leakage.
4. When leaks are notices, have the Vario
gearbox repaired in an authorised work-
shop.
5. Take the required gearbox oil from table
(Fig. 147).
6. Fill the Vario gearbox up to the oil gauge
window (Fig. 147/1) via the oil filler neck
(Fig. 147/2) with gear oil. .
7. After filling cover the filler neck with the dust
cap (Fig. 147/2).
Fig. 147
Filling quantity and hydraulic oil type for the Vario gearbox
Total filling quantity:
0,9 litre
Gear oil (at random):
Wintershall Wintal UG22 WTL-HM (factory)
Fuchs Renolin MR5 VG22
Table 4
