AMADOS-II DB 531.3 05.00
64
Fitting instructions
Fig. 4.1
braun
+
-
blau
12 V
Error
km/h
1/min
123
3
0
I
km/h
+1
+
10%
10%
kg/ha
ha
100%
ha
_
1/min
MOD
m
Imp.
Cal.
kg/
ha
1
40
100 m
Start
C
+
_
Eingabe
Input
Σ
STOP
3
1
6
7
5
4
2
16A
4.0
Fitting instructions
4.1
Console and "AMADOS-II"
-
Fit console (4.1/1) within reach and sight to the right
hand of the operator; it must be free of vibrations and
electrically conductive (scratch off paint in the area of
contact) inside the tractor cab.
The distance of the "AMADOS-II" from a
radio transmitter and an antenna should at
least be 1 m.
For fitting the console, please ensure that
the optimum viewing angle to the display
lies between 45° and 90° .
Make sure that the "AMADOS-II" housing
(4.1/2) receives via the console an
electrically conductive connection to the
tractor chassis. Scratch off all paint from
the fitting surfaces.
-
Fit the bracket (4.1/3) fitted to the "AMADOS-II" onto
the tube of the console, bring it to the desired position
and fix by the thumb bolt there.
4.2
Battery connection lead
-
Connect the battery connection lead (4.1/4) for the
power supply directly with the tractor battery (12 V)
and lay cable.
-
Connect cable connector (4.1/5) with fuse (5A) to
brown cable and connect with the plus pole of
the tractor battery.
-
Connect blue cable with the minus pole (earth).
When connecting to the battery first
connect plus cable to plus pole. Then
connect earth cable to minus pole. When
disconnecting battery, proceed in vice
versa order.
Connect minus pole of the battery (earth)
with frame or chassis of the tractor which
is especially important with older Ameri-
can, Canadian or British tractor types.
Tractors with a switch in the mass cable of
the battery (e.g. Zetor 8011, 8045) connect
blue mass cable directly with mass (earth)
(frame or chassis).
-
Connect power supply cable (4.1/6) of the
"AMADOS-II" with the socket (4.1/7) .
I
I
I
I
I