AMADOS-II DB 531.3 05.00
62
Hectare meter - Putting into operation in the field
3.3.4.2
Function-keys and their use during the
operation
By pressing one of the following function keys for approx.
10 seconds the wanted value will be displayed. Thereafter
the computer automatically switches back into the
"operation display".
3.3.4.2.1 Forward speed k.p.h.
After pressing key
the momentary forward
speed is displayed in [k.p.h.].
Display after pressind key "km/h"
Error
km/h
1/min
3.3.4.2.2 Hectare meter
1.
Hectare meter - Part area
After one-time pressing key
Σ
the covered part
area in [ha] is displayed, which has been covered since
actuating the "start function".
Only the covered area will be determined at
which the fertiliser broadcaster had been
in operating position.
Display after one-time pressing the key
Error
km/h
1/min
2.
Hectare meter - Total area
After two-times pressing the key
Σ
the total area
in [ha], e.g. of one season, is displayed.
Display after two-times pressing the key
Error
km/h
1/min
2.1
Set memory for hectare meter - total area to
“0”
Set memory for the hectare meter - total area via a reset
to “0”.
Press
and hold it pressed while pressing “0”,
release key.
A reset will eradicate all !!! memorised data
from the AMADOS-II. Therefore, prior to
resetting it is imperative to write down all
important data.
F
I