AMADOS-II DB 531.3 05.00
Seed drill - Preparations for starting the operation
35
3.2.3.2.2 Deviations between displayed and actual
gearbox setting lever position
Example 1: The value for the actual gearbox setting
lever position is higher than the value
shown on the display
shown gearbox setting lever position: “50”
actual gearbox setting lever position: “51”
How to conduct a new calibration procedure:
-
Switch off and on „AMADOS-II“. The setting motor
drives the gearbox setting lever on the scale of the
two range gearbox in position „0“.
-
Press key
, hold it pressed and
simultaneously press key
thus starting the
calibration procedure.
The value „0“ appears on the display.
-
keep pressed until on the display the gearbox
setting lever position „97“ will be shown.
-
Press
and the calibration procedure is
terminated.
-
Compare the gearbox setting position shown on the
display with the gearbox setting position on the scale
of the two-range gearbox.
If the shown and actual setting lever position still
does not coincide, repeat correspondingly the
calibration procedure.
Example 2: The value for the actual gearbox setting
lever position is smaller than that shown
on the display
shown gearbox setting lever position: “50”
actual gearbox setting lever position: “49”
How to conduct a new calibration procedure:
-
Switch off and on „AMADOS-II“. The setting motor
drives the gearbox setting lever on the scale of the
two range gearbox in position „0“.
-
Press key
, hold it pressed and
simultaneously press key
thus starting the
calibration procedure.
The value „0“ appears on the display.
-
keep pressed until on the display the gearbox
setting lever position „99“ will be shown.
-
Press
and the calibration procedure is
terminated.
-
Compare the gearbox setting position shown on the
display with the gearbox setting position on the scale
of the two-range gearbox.
If the shown and actual setting lever position still
does not coincide, repeat correspondingly the
calibration procedure.