AMADOS-II DB 531.3 05.00
Seed drill - Preparations for starting the operation
39
F
I
I
3.2.3.3.2 Enter the working width
For determining the worked area "AMADOS-II" requires
the information of the working width. To enable it enter
the working width as follows:
-
Press key
.
-
Dial the value by pressing keys
or
e.g. “3.00” for 3 m working width.
Display working width
-
Press key
and store the selected value.
-
Press key
once again and check stored
value. The display must now show the chosen value,
e. g. "3.00".
I
3.2.3.3.3 Enter the seed rate value
(only on seed drills with seed rate remote
control)
The desired seed rate can only be entered
on the machine stationary.
-
Press key
100%
.
-
Dial the desired seed rate value via the keys
or
on the display (e. g. 200 for 200 kg/ha).
-
Press key
and store the dialed value (200).
-
Press key
100%
once again and theck the
stored value. The display must then show the figure
"200".
Display of the seed rate value
Error
km/h
1/min
-
Conduct a calibration test.
In case of changing the seed material
conduct a new calibration test.
In case of changing the seed rate by more
than 50 % it is recommended to conduct a
new calibration test.
On seed drills with seed rate remote control
the seed rate can be adjusted during
sowing by the keys
+
or
in
+/- 10% steps (depending on the selected
coding, please refer to para. 3.2.4.3).