AMADOS-II DB 531.3 05.00
Centrifugal broadcaster - Putting into operation in the field
19
4. Stop vehicle, press key
100%
and dial on the
display the spread rate "167" [kg/ha] via the keys
or
press key
and store entered value "167".
Press once again key
100%
and check the
entered value. The display should then show the
figure "167".
Conduct the calibration test with grass seed (refer
to para. 3.1.3.2.4 ):
5. Press
and hold it pressed while pressing
and start the calibration test. The display
now shows a "0".
6. Start the tractor engine and let pto shaft rotate at
(540 R.P.M.) land open left hand shutter slide for at
least 30 seconds.
7. Weigh the collected grass seed.
8. enter the weight of the collected grass seed via the
keys
or
into the computer,e.g.
"0.50" for 0,5 kg.
Press key
and confirm.
"AMADOS-II" now detemines a calibration factor
characteristic for the grass seed and working width
used which can be displayed by pressing
key
.
9. Enter the desired grass seed spread rate (34 kg/ha)
as described before.
10. Refit left hand spreading disc.
For broadcasting rye grass pleasse proceed with
the calibration test in the following order:
1. In setting chart find page for the spread rate
setting of CAN 27 % N gran. BASF .
Table 3.3:
"Spread rate setting CAN 27 % N gran. BASF"
Extract from the setting chart
CAN 27 % N Granular BASF; DSM; HYDRO
1,04 kg/l
HYDRO Super Grass NPK 25-5-5 Blend
1,01 kg/l
HYDRO Extra Grass NPK 29-5-5 Blend
0,92 kg/l
K+S Korn-Kali ® Granular 40 % K2O, 6 % MgO,
4 % S, 3 % Na
1,12 kg/l
20
21
24
27
28
km/h
km/h
km/h
km/h
km/h
8
10
12
8
10
12
8
10
12
8
10
12
8
10
12
25
135 108
90 128 103
86 112
90
75 100
80
67
96
77
64
26
150 120 100 143 115
95 125 100
84 111
89
74 107
86
72
27
167 133 111 159 127 106 139 111
93 124
99
82 119
95
79
28
184 147 123 175 140 117 154 123 102 136 109
91 132 105
88
29
203 162 135 193 154 129 169 135 113 150 120 100 145 116
96
30
222 178 148 211 169 141 185 148 123 164 131 110 158 127 106
31
242 194 161 231 184 154 202 161 134 179 143 120 173 138 115
32
263 210 175 251 200 167 219 175 146 195 156 130 188 150 125
33
285 228 190 271 217 181 237 190 158 211 169 141 203 163 136
34
307 246 205 293 234 195 256 205 171 228 182 152 220 176 146
35
331 265 220 315 252 210 276 220 184 245 196 163 236 189 157
36
355 284 236 338 270 225 296 236 197 263 210 175 253 203 169
37
379 303 253 361 289 241 316 253 211 281 225 187 271 217 181
38
404 323 270 385 308 257 337 270 225 299 240 200 289 231 193
39
430 344 287 409 328 273 358 287 239 318 255 212 307 246 205
40
456 365 304 434 348 290 380 304 253 338 270 225 326 261 217
41
483 386 322 460 368 306 402 322 268 358 286 238 345 276 230
42
510 408 340 485 388 324 425 340 283 377 302 252 364 291 243
43
537 429 358 511 409 341 447 358 298 398 318 265 383 307 256
44
564 451 376 537 430 358 470 376 313 418 334 279 403 322 269
45
592 473 395 564 451 376 493 395 329 438 351 292 423 338 282
46
620 496 413 590 472 393 516 413 344 459 367 306 443 354 295
47
647 518 432 617 493 411 540 432 360 480 384 320 462 370 308
48
675 540 450 643 514 429 563 450 375 500 400 333 482 386 322
49
703 562 469 670 536 446 586 469 391 521 417 347 502 402 335
50
731 584 487 696 557 464 609 487 406 541 433 361 522 417 348
51
758 606 505 722 578 481 632 505 421 561 449 374 541 433 361
52
785 628 523 748 598 498 654 523 436 582 465 388 561 449 374
53
812 650 541 773 619 515 677 541 451 601 481 401 580 464 387
54
838 671 559 798 639 532 699 559 466 621 497 414 599 479 399
m-kas12.xls
m
2. Look for column 20 m working width and 8 k.p.h.
In this column for the setting lever position "27"
(shutter position "27" for rye grass spread rate
34 kg/ha) read off the spread rate "167" [kg/ha].
3. Press key
and dial via keys
or
the figure "12" (for 12 m working width with
rye grass) on the display.
Press key
and store.
Lever setting pos.