Page 4-2
FPT-40 Fingerprint Terminal Installation & Operation Guide
If you are configuring a direct connect serial FPT-40 Fingerprint terminal,
determine the PC Comm port that the USB CommStik is connected to
and select it in the Location tab screen.
Connecting a Fingerprint Terminal to Time Guardian
The Location tab on the Communication Settings screen (see figure) is
used to setup communications between Time Guardian and the FPT-40
Fingerprint terminal. Only one terminal type can be used per Location. If
you have more than one terminal type, you must configure multiple
Locations.
Figure 4-2 TG Communication Settings Location Tab
Note:
If you fail to connect to the fingerprint terminal, confirm that the
Comm Opt settings at the terminal are correct. For example, if
your terminal is network connected, the Ethernet connection
should be set to Y(es), and the proper IP address set.