Amano Time Guardian FRT-40, User Manual, Page: 26 / 93

FPT-40 Fingerprint Terminal Installation & Operation Guide Page 2-11
3. Press OK to display the Enroll User menu and select Enroll FP
(see Figure 2-15 ). The possible enrollment choices using the T or
S
buttons are; FP = fingerprint, Pwd = password only, and FP &
Pwd = fingerprint & password).
Enroll User
Enroll FP
Enroll Pwd
FP & Pwd
Figure 2-15 Enroll User Menu
4. Press OK and Enroll FP New Enroll? will appear (see Figure 2-16 ).
Enroll FP
New Enroll ?
ESC
OK
Figure 2-16 New Enroll FP Screen
Note: If this is the first User ID the display will show " New Enroll User
ID 00001 ". Pressing ESC at this step will place the terminal into
the Backup Enroll mode (see How to Enroll Multiple Fingers for a
User on page 2-23).
5. Press OK to begin enrollment, and New Enroll User ID will appear to
accept/enter the User ID (see figure). Enter the User ID using the
keypad and/or the
T
or
S
buttons. Press ESC to exit and return to
the Enroll User menu.
New Enroll
User ID 00002
ESC OK
Figure 2-17 New Enroll User ID Screen
Note: The default User ID is 5 digits, so any number less than 5 digits
will have zeros in front of it, i.e., if the number is 2, 00002 will be
displayed. The User ID will auto-sequence each new User ID + 1
digit. [the range is 00001 to 65534].