FPT-40 Fingerprint Terminal Installation & Operation Guide
Page 2-25
4. Press
OK
and Enroll FP New Enroll? will appear (see
Figure 2-58
).
Enroll FP
New Enroll ?
ESC
OK
Figure 2-58 Enroll FP Screen
5. Press
ESC
to exit New Enroll and initiate Backup Enroll. The lowest
numeric User ID will be shown first, and the User IDs will be listed in
ascending numeric order. Use the keypad and/or the
T
or
S
buttons
to enter/select the User ID you want to add a finger template to.
Backup Enroll
User ID 00001
ESC
OK
Figure 2-59 Backup Enroll User ID Screen
6. With the desired User ID selected, press
OK
to add another finger
template (see figure), and the User ID will indicate that an additional
template is being added by the dash number after the User ID [i.e.,
00010 – 1 means user ID # 10 has 2 templates] (see figure).
Backup Enroll
00001-1
Place Finger ...
ESC/Exit
Figure 2-60 Backup Finger Enrollemnt - Place Finger 1st Pass
Note:
The system may prompt you with voice and on screen warnings
if errors in the enrollment process occur. For example, if that ID
already has the same finger enrolled, the voice prompt will say
"
Duplicate Finger
" while the screen will display "FP Enrolled
Alrd".
Note:
The system will not allow duplicate enrollment of the same
finger. You must enroll a different finger.