![background image](http://html1.mh-extra.com/html/amano/pioneer-eclipse-pe440st/pioneer-eclipse-pe440st_operators-manual_2918200014.webp)
14
Engine Ignition Switch
This machine features a key switch ignition.
START:
Turn the key all the way clockwise to engage
the engine starter motor. Once the engine starts
release the key.
NOTE: Always start this machine with the bail throttle
in the idle or “SLOW” position.
RUN:
This is the position of the key while the engine is
running.
OFF:
Turn the key to the “
OFF
” position to stop the
engine from running.
NOTE: For safety, always close the propane cylinder
valve to stop the engine and then turn the key switch
to the “OFF” position.
Hour Meter / Tachometer
The hour meter / tachometer records the number of
hours the machine has been powered “
ON
”. The
hour meter reading is used to mark recommended
maintenance intervals. It also displays the engine
speed. This meter displays hours when the machine
is turned “
OFF
” and engine speed when the engine is
running.
Bail Throttle
Do not try to start the machine with the bail throttle in
the operating position.
After the engine has started and the brushes on the
floor, pull the bail throttle to the operating position. The
clutch will engage automatically and the engine will
throttle to the correct speed.
CAUTION! DO NOT pull the bail throttle unless the
brushes are on the floor.
Release the bail and the clutch will automatically
disengage. The engine speed will return to idle.
Fuse
The machine’s electrical circuit is protected by a fuse,
which stops the flow of current in the event of a circuit
overload. Once a fuse blows, it must be replaced. If
the overload that caused the fuse to fail is still present,
the new fuse will fail and the problem must be corrected.
DO NOT
bypass any fuse. The ignition fuse is located
on the side of the starter switch panel.
START
RUN
OFF
Summary of Contents for Pioneer Eclipse PE440ST
