![background image](http://html1.mh-extra.com/html/amano/pioneer-eclipse-pe440st/pioneer-eclipse-pe440st_operators-manual_2918200017.webp)
17
Pad / Brush Change
1. Place the machine in the Rok-Bak position. (see Rok-
Bak section)
2. Facing the brushes from the front of the machine,
turn the brush on the right counter-clockwise with a
quick motion and pull the brush towards you. Turn
the brush on the left clockwise with a quick motion
and pull the brush towards you.
CAUTION! Carefully inspect the brush/pad holder for
cracks or damage. Replace if necessary.
WARNING! A damaged brush/pad holder rotating at
high speeds may be an extreme hazard if it should
come apart.
3. While facing the machine from the front, place the
brush on the right into the slots and turn clockwise
with a quick motion. Make sure the brush snaps into
place. Place the brush on the left in the slots and turn
counter-clockwise with a quick motion. Make sure the
brush snaps into place.
4. Verify that all three lugs of both brushes are correctly
installed. If all three lugs are not properly installed,
it is possible that the brush could come loose from
the assembly. This may also cause damage to the
machine and/or floor.
5. The machine can now be lowered to the floor
DO NOT
store the machine with the brushes in contact
with the floor. The brushes could flatten during storage.
Always store the machine using the transport cart to
hold the brushes off of the floor.
Handle Adjustment
1. The height of the handle can be adjusted by raising
or lowering the handle.
2. Loosen the handle pivot knobs on the sides of the
bulkhead, turning the right side counter-clockwise
and the left side clockwise.
3. Move the handle in and out to the desired height
4. Tighten the handle pivotknobs.
Summary of Contents for Pioneer Eclipse PE440ST
