Appendix E - Parameters Summary
Parameters Summary
BreezeACCESS EZ AU-EZ
145
System Manual
E.1.2
IP Parameters
E.1.3
Air Interface Parameters
Parameter
Range
Default
Run-Time
IP Address
IP address
10.0.0.1
No
Subnet Mask
IP address
255.0.0.0
No
Default Gateway
Address
IP address
0.0.0.0
No
DHCP Option
Disable
DHCP Only
Automatic
Disable
No
Access to DHCP
From Wireless Only
From Ethernet Only
From Both Wireless
and Ethernet
From Ethernet Only
No
Parameter
Range
Default
Run-Time
ESSID
Up to 31 printable ASCII characters
ESSID
No
Maximum Cell Distance
0-54 (Km)
0 means no compensation
0 (no compensation)
Yes
Arbitration Inter-Frame
Spacing
1-50 (time slots)
2 time slots
No
Wireless Trap Threshold
1-100 (%)
30 (%)
No
Maximum Number of
Associations
1-512 (1 124 if Data Encryption
Option should be enabled).
48
Yes
Frequency
According to the Sub-Band
The lowest frequency
in the Sub-Band
Yes
DFS Required by
Regulations*
No
Yes
Depends on Country
Code
Yes**
Frequency Subset
Definition (in AU)*
According to the Sub-Band. A list of
frequency indexes or A for all
frequencies supported by the
Sub-Band
A
Yes
Summary of Contents for BreezeACCESS EZ AU-EZ
