Alvarion BreezeACCESS EZ AU-EZ, System Manual

Page: 66 / 175

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS EZ AU-EZ 47 System Manual

Force 10 Mbps and Full-Duplex

Force 100 Mbps and Half-Duplex

Force 100 Mbps and Full-Duplex

Auto Negotiation (10/100 Mbps and Half/Full Duplex)
The default is Auto Negotiation (10/100 Mbps and Half/Full Duplex)
4.2.3.8 Change System Location
The Change System Location option enables changing the system location of the
unit, which is also the sys location in MIB2. The System Location is also displayed
as a part of the Monitor menu's header.
Valid values: A string of up to 35 printable ASCII characters.
The default system location is an empty string.
4.2.3.9 Event Log Menu
The Event Log Menu enables controlling the event log feature. The event log is an
important debugging tool and a flash memory sector is dedicated for storing it.
Events are classified according to their severity level: Message (lowest severity),
Warning, Error or Fatal (highest severity).
The severity level of events that should be saved in the Event Log is configurable.
Events from the configured severity and higher are saved and may be displayed
upon request. Log history can be displayed up to the full number of current active
events. In the log, an event is defined as active as long as it has not been erased (a
maximum of 1000 events may be stored). The Event Log may be read using TFTP,
with remote file name <SNMP Read Community>.log (the default SNMP Read
Community is "public"). The Event Log may also be uploaded to a remote FTP
server.
The Event Log Menu includes the following options:

Event Log Minimum Severity

Display Event Log

Erase Event Log

Event Load Upload