Alvarion BreezeACCESS EZ AU-EZ, System Manual

Page: 46 / 175

Chapter 3 - Commissioning Configuring Basic Parameters
BreezeACCESS EZ AU-EZ 27 System Manual
3.1.2 Country Code Selection
DFS Detection Algorithm ETSI Applicable only for Universal
Country Code in 5.4 or 5.8 GHz
band if DFS is enabled
ATPC Option for EZ Disable In ATPC Parameters
Transmit Power Dependent on
Country Code
Tx Control On
Antenna Gain According to the
antenna supplied
with the unit and the
Country Code. If set to "Not Set Yet", must be
configured according to actual
value, taking into account cable's
attenuation.
Maximum Distance 0 (No Compensation) In Cell Distance Parameters
VLAN ID-Management 65535 In VLAN Support
Authentication Algorithm Open System In Security Parameters.
Availability of security parameters
depends on support according to
the country code.
Data Encryption Option Disable
Security Mode WEP
Default Multicast Key Key 1
Key 1 to Key 4 00……0 (32 zeros,
meaning no key)
NOTE
Some parameters are changed to their new values only after reset (refer to
Appendix E
for more
details). After the basic parameters are configured, the unit should be reset in order to activate the
new configuration.
CAUTION
The selected Country Code must comply with applicable local radio regulations.
Table 3-1: AU-EZ Basic Parameters
Parameter Default Value Comment