Alvarion BreezeACCESS EZ AU-EZ, System Manual

Page: 135 / 175

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS EZ AU-EZ 116 System Manual
The default selection is Disable.
4.2.6.6.1.2 Set/Change Filter IP Address Range
The Set/Change Filter IP Address Ranges option enables defining/updating up to
8 IP address ranges to/from which IP frames are to pass if the User Defined
Addresses Only option is selected in the User Filtering Option parameter.
The default Filter IP Address Range is 0.0.0.0 TO 0.0.0.0 (all 8 ranges).
A range can be defined using a string that includes either a start and end address,
in the format "<start address> to <end address>" (example: 192.168.1.1 to
192.168.1.255), or a base address and a mask, in the format "<base address>
mask <mask>" (example: 192.168.1.1 mask 255.255.255.0).
4.2.6.6.1.3 Delete Filter IP Address Range
The Delete Filter IP Address Range option enables deleting IP address range
entries from the Filter IP Address Ranges list.
4.2.6.6.1.4 Delete All User Filtering Entries
The Delete All User Filtering Entries option enables deleting all entries from the
Filter IP Address Ranges list.
4.2.6.6.1.5 DHCP Unicast Override Filter
When user filtering is activated, unicast DHCP messages are filtered out; therefore
the unit cannot communicate with the DHCP server. The DHCP Unicast Override
Filter option enables to overcome this problem. When enabled, unicast DHCP
messages pass, overriding the user filtering mechanism.
The default is Disable DHCP Unicast.
4.2.6.6.1.6 PPPoE Override Filter
When user filtering is activated, PPPoE packets are filtered out. The PPPoE
Override Filter option enables to overcome this problem. When enabled, PPPoE
packets pass, overriding the user filtering mechanism.
The default is Disable.
4.2.6.6.1.7 Show User Filtering Parameters
The Show All User Filtering Parameters option displays the current value of the
User Filtering Option and the list of User Filtering addresses, subnet masks and
ranges.
4.2.6.6.2 MIR and CIR Parameters
The MIR (Maximum Information Rate) value specifies the maximum data rate
available for burst transmissions, provided such bandwidth is available.