Alvarion BreezeACCESS EZ AU-EZ, System Manual

Page: 34 / 175

Chapter 2 - Installation Installation Requirements
BreezeACCESS EZ AU-EZ 15 System Manual
2.1 Installation Requirements
This section describes all the supplies required to install the AU-EZ and the items
included in each installation package.
2.1.1 Packing List
2.1.1.1 AU-EZ Standalone Access Unit

The AU-EZ installation kit includes the following components:

DU (indoor unit) with a wall mounting kit

Mains power cord

ODU (outdoor unit)

Pole mounting kit for the ODU

IDU-ODU cable kit that includes a Waterproof Seal (Service Box) and 3 RJ-45
shielded connectors (cable is not included).
2.1.1.2 Additional Items Available from Alvarion

IDU to ODU Category 5 Ethernet cable (available in different lengths). For
more details refer to
Section 2.1.2

Antenna kit, including a 0.5 m RF cable.
2.1.1.3 Additional Installation Requirements
The following items are also required to install the AU-EZ:

Ethernet cable (straight for connecting to a hub/switch etc.)

Crimping tool for RJ-45 connectors

Ground cables with an appropriate termination

Mains plug adapter or termination plug (if the power plug on the supplied AC
power cord does not fit local power outlets)