Alvarion BreezeACCESS EZ AU-EZ, System Manual

Page: 111 / 175

Chapter 4 - Operation and Administration Menus and Parameters
BreezeACCESS EZ AU-EZ 92 System Manual

Selected Calibration Option: The currently selected Calibration Option to
Use.
4.2.6.3 Network Management Parameters
The Network Management Parameters menu enables protecting the Unit from
unauthorized access by defining a set of discrete IP addresses as well as IP
address ranges from which the unit can be managed using protocols such as
Telnet, FTP, TFTP, SNMP, DHCP and ICMP. This excludes management messages
generated in the unit, such as Traps or Ping Test frames, which are not filtered.
The direction from which management access is permitted can also be configured,
which means that management access may be permitted from the wireless
medium only, from the wired Ethernet only, or from both.
The Network Management Menu also enables managing transmission of traps,
including definition of up to 10 traps destination IP addresses and the associated
community strings.
The Network Management Parameters menu includes the following options:

Access to Network Management

Network Management Filtering

Set Network Management IP address

Delete a Network Management IP Address

Delete All Network Management IP Addresses

Set/Change Network Management IP Address Ranges

SNMP Traps
4.2.6.3.1 Access to Network Management
The Access to Network Management option defines the port through which the
unit can be managed. The following options are available:

From Wireless Link Only

From Ethernet Only

From Both Ethernet and Wireless Link