Supervisor 4500 User Guide
Page 54 For Assistance: [email protected] +1 (909) 591-8431
PUD4386R1-1
Appendix A - Configuring Dynamic Lights (Cont.)
Exporting Configuration File to Turnstile:
It is assumed that the laptop IP address has been set to the same subnet as the turnstile IP adddress.
7. Using a laptop, or a computer on the same network as the turnstiles, connect to the turnstile using the RUN
command on your computer and the turnstile IP address.
In the RUN box, enter the turnstile IP address in this format: \\IPaddress
[Fig. 4]
If prompted for credentials use:
User -
admin
& Password -
alvarado
8. Once logged in, navigate to this folder location:
\\turnstileIP\FlashDisk\SU4500
9. Drag and drop the
NeoPixel_Config
file into the SU4500 directory.
10.
Power cycle the turnstile for the new light configuration to take effect. Ensure power is off for a
minimum of thirty
(30) seconds
to ensure the new configuration takes effect.
NOTE
NOTE
NOTE
It is recommened to back up the original NeoPixel_Config file currently located in the SU4500 directory in the
event the LEDs need to be reverted back to the stock configuration.
Run Command IP Format
Fig. A4
