Supervisor 4500 User Guide
Page 22 For Assistance: [email protected] +1 (909) 591-8431
PUD4386R1-1
There is a power key switch on the inside of the base
cover of all Main and center cabinets.
1. Power on the turnstile using the power key switch
[Fig. 12]. The turnstile "boot up" cycle will take less
than one minute to complete.
2. After the power-up sequence has completed,
the SU4500 will enter the previously configured
passage modes or the passage modes currently
defined in GateKeeper.
As noted previously, passage mode settings are
configured using the I/O control board inputs,
GateKeeper software (if installed).
SU4500s are factory set to operate in Controlled
Passage mode in both the entry and exit directions.
NOTE
Fig. 12
Fig. 12
Power Key Switch
Power Key Switch
POWER OFF
POWER OFF
POWER ON
POWER ON
Powering On / Off
SU4500 Operation
