Supervisor 4500 User Guide
Page 53 For Assistance: [email protected] +1 (909) 591-8431
PUD4386R1-1
4.
Once the operation mode profile has been configured for color and transition, you may apply the profile
changes to other LED groups that would need to look identical by highlighting the corresponding groups
in the “Apply this profile to” window.
For example: In the image below, the Unsecured Panel Main (LED Group 1) is applied to the
Unsecured Panel Secondary (LED Group 2) so that the unsecured side of the turnstile looks identical.
5.
Once done configuring the LED group, click save at the bottom of the screen. The LED Configuration Utility home
screen will show which profiles have been modified. [Fig. 3]
6.
Once done editing the desired LED groups, click “Export Configuration” on the LED Configuration Utility home
screen. Choose a location of where to save the
NeoPixel_Config
configuration file.
Appendix A - Configuring Dynamic Lights (Cont.)
Modified LED Groups
Fig. A3
Do not change the file name.
NOTE
Panel Main:
End Secondary:
Status Secondary:
Panel Secondary:
Panel Main:
Panel Secondary:
Status Main:
End Main: