16
my-netti.com
Model:
NettI 4U CE
Language:
English
Version:
2017-06
to check that the back rest is
locked, grip the push bow and
press the back rest forward.
if the back rest falls forward -
repeat the locking procedure
or contact your local dealer.
•
the wheelchair is set to a standard seat
depth. the plastic bracket has 4 holes of
which three are temporarily blocked with
plastic plugs.
•
the back rest hinge has 4 holes. the hole
positions are in accordance with the holes
in the plastic bracket. if the locking head of
the gas spring is mounted in the inner hole
of the plastic bracket, the back rest hinge
should also be mounted in the inner hole
etc.
•
•
6.6 SEAT DEPTH ADjUSTMENT
•
the seat depth can only be adjusted at the
rear. loosen the locking bolt in the plastic
bracket.
•
find the required position for the locking
head in the plastic bracket, and remove
the plastic plug from this hole.
•
lock the back rest by pushing the locking
bolt through the plastic bracket and the
gas spring locking head.
•
after changing the hole position in the
plastic bracket, the hole position in the
back rest hinge must be changed into the
parallel position.
check that the hole in the back rest
hinge and the plastic bracket are
mounted into the same hole position.
6 mm allen-key
6.7 ANTI-TIPS
the anti-tips should be mounted accord-
ing to the mounting description which is
enclosed with the chair upon arrival.
use of the anti-tips
•
Pull the anti-tip out
•
turn it up or down 180°.
•
lock it in position
