background image

26

  

my-netti.com

Model: 

NettI 4U CE

Language: 

English

Version:

 

2017-06

8. manoeuVering

8.1 GENErAl TECHNIQUES

Manoeuvering and chair balance:

the weight and balance of the chair influences 
the manoeuvering qualities of the wheelchair. 
the weight, size and sitting position of the 
user are influencing factors. the position 
of the wheels will in addition influence the 
manoeuvering qualities. the more weight 
placed over the main wheels, the easier it is 
to manoeuver. if heavy weight is placed over 
the front castors, the chair will be heavy to 
manoeuver. see page 16 - seat depth adjust-
ment - for balancing the chair.

 Step approach:

always approach the step in slow motion 
preventing the front castors to hit the step
with force. the user could fall out of the chair 
by the impact. the front castors could be 
damaged.

 Driving forward down steps / sidewalks

Be cautious that you do not drive down steps 
higher than 30mm. the leg supports mayhit 
the ground first. thereby you may lose ste-
ering control and the leg supports may brake. 

 

Driving on soft, rough or slippery ground

can make safe manoeuvering more difficult as 

the wheels may lose traction and it is difficult 

to control the wheelchair.

Parking:

increase the footprint and the support of the
wheelchair by moving the chair about 100 mm 
rearwards making the front castors
turn forward.

Companion:

 

If the user is left alone in the wheelchair,

always lock the brakes and check that the        

anti-tips are turned down.

• 

8.2 DrIVING TECHNIQUES

- step up-

Companions, drive up a step forwards:

• 

check that the anti-tips are turned up. 
angle the wheelchair backwards.

• 

Balance the chair on the main wheels and   
push it forward until the front castors are 
on the step. 

• 

lift the chair by the push bow while push-
ing the chair onto the step.

 

 

Turn the anti-tip downwards. 

Users, drive up a step backwards:

this technique is only useful if the step
is very low. it also depends on the clearance
between the foot plates and the ground.

• 

check that the anti-tips are turned up.

• 

Drive the chair backwards towards the   
step.

• 

make a firm grip on the push rims and   
move the body forward while pulling.

 

Turn the anti-tip downwards.

Companions, drive up a step backwards:

• 

check that the anti-tips are turned up.

• 

Pull the chair backwards next to the step

• 

angle the wheelchair backwards, moving 
the front castors slightly up in the air.

• 

Pull the wheelchair up the step and go   
backwards long enough to put down the   
front castors on the step.

 

Turn the anti-tip downwards.

8.3 DrIVING TECHNIQUES

- step down-

Companions, drive down a step

forwards:

• 

check that the anti-tips are turned up.

• 

angle  the  wheelchair  backwards,  moving          
the front castors slightly up in the air.

• 

Drive  carefully  down  the  step  and  angle           
the wheelchair forward putting the front      
castors back on the ground.

 

Turn the anti-tip downwards.

                          

Summary of Contents for Netti 4U comfort CED









































Reviews: