22
my-netti.com
Model:
NettI 4U CE
Language:
English
Version:
2017-06
Adjusting the height of the arm support
•
loosen the screw on the arm support
using a 4 mm allen key.
•
raise or lower stem
•
tighten the screw
Never lift the chair holding onto
the arm supports.
6.12 ADjUSTING THE PArkING
brAkES
•
the brakes are freely adjustable along the
frame tube.
•
to activate the brake, push the handle
forward.
•
•
to release the brake, pull the handle
rearwards.
•
to reposition the brake, loosen the two
screws on the inside of the brake clamp.
•
adjust the brake position and tighten the
2 screws.
•
for fine adjustment, loosen the upper
screw on the inside of the brakes .
•
adjust the brake position and tighten the
screw.
5 mm allen key
check that the brakes are correctly
adjusted by activating the brakes and be
sure that the wheelchair does not move.
the brakes are constructed as
parking brakes and shall not be
used as driving brakes.
Be aware of potential squeeze
hazard between brake and tyre.