my-netti.com
21
Model:
Netti 4U
CE
Language:
English
Version:
2017-06
•
move the adapter to the required position.
the head support bracket is fixed by tight-
ening the four screws two by two diago-
nally so the bracket is fixed with the same
strength divided on the four screws.
remember to release the levers when
adjusting the head support.
if the head support stand does not fit
the bracket perfectly, the bracket is
probably fixed too tight or unevenly.
after fitting the head support, fix it
properly by tightening the little set screw
in the centre on top of the head support
bracket using an allen key.
if the head support seems to short in
height, it can be turned 80° by releasing
the adjustment wheel at the rear of the
horizontal bar (B) .
6.11 ArM SUPPorT
the arm supports are removable,
height- and depth adjustable.
Please be aware while mounting that
there is a left-hand-side and a right-
hand-side arm support.
Mounting the arm support
•
grip the arm support and place the rear
end of the arm support onto the plastic
bracket of the back rest hinge. Push it
downwards until it clicks into position. give
the arm support a slight push in horizontal
direction to make sure that it is locked.
removing the arm
support
•
Pull the locking
knob at the rear of
the arm support
and lift the arm
support up.
