18
my-netti.com
Model:
NettI 4U CE
Language:
English
Version:
2017-06
Mounting of leg support
•
mount the leg support by holding onto
the bar bending down towards the foot
plate. Hold it in an angle of approximately
20° to the side frame. Put it into the black
leg support lock. swing it in and push
down.
Adjusting the angle
-
universal leg support
•
the angle of the leg support can be
adjusted using the star wheel in center
of the hinge point.
•
loosening this star wheel enables you to
adjust the leg support to the required
angle.
•
fix the angle by tightening the star wheel.
Adjusting the angle
-
angle adjustable leg support
•
the angle of the leg support can be ad-
justed using the star wheel.
•
loosening this star wheel enables you to
adjust the leg support to the required angle.
•
fix the angle by tightening the star wheel.
squeeze hazard. When adjusting leg
supports in angle, do not put the
fingers in the adjusting mechanism
between the moving parts.
Adjusting the length of the leg support
•
loosen the screw (a) ill. next page,
to make the adjustment tube move
•
adjust the leg support in required
position and fix the screw properly.
