Altuscn KM0032 User Manual Download Page 46

Page: 46 / 155

KM0032 / KM0532 / KM0932 User Manual

Browser Login

The KM0532 or KM0932 can be accessed via an Internet browser from any
platform.

Note:

1. The KM0032 is installed as a daisy chained extension to a KM0532

or KM0932, and cannot be accessed directly. It can only be accessed
via a login to the switch it is daisy chained from (a KM0532 or
KM0932).

2. Browser logins can be used for remote configuration purposes. Port

access operations can only be performed from a Console login.

To log into the switch, do the following:

1. Open the browser and specify the IP address of the switch you want to

access in the browser's location bar.

2. When a Security

Alert

dialog box appears, accept the certificate – it can be

trusted. (See

Trusted Certificates

, page 125, for details.) If other alerts

appear, accept them as well.

Once you accept the certificate(s), the login page appears:

3. Provide your username and password (set by the administrator), then click

Login

to bring up the Browser UI Main Page. For a discussion of the

Browser UI Main Page, see page 38.

Summary of Contents for KM0032




























































































































































Search results

Summary of Contents for KM0032

Reviews:

Altuscn KM0032, User Manual, Page: 46 / 155

Search results

Summary of Contents for KM0032

Reviews: