manualshive.com logo in svg

Altuscn KM0032, User Manual, Page: 3 / 155

Share
Download
Altuscn KM0032 User Manual Download Page 3

KM0032 / KM0532 / KM0932 User Manual

iii

User Information

Online Registration

Be sure to register your product at our online support center:

Telephone Support

For telephone support, call this number:

User Notice

All information, documentation, and specifications contained in this manual 
are subject to change without prior notification by the manufacturer. The 
manufacturer makes no representations or warranties, either expressed or 
implied, with respect to the contents hereof and specifically disclaims any 
warranties as to merchantability or fitness for any particular purpose. Any of 
the manufacturer's software described in this manual is sold or licensed 

as is

. 

Should the programs prove defective following their purchase, the buyer (and 
not the manufacturer, its distributor, or its dealer), assumes the entire cost of all 
necessary servicing, repair and any incidental or consequential damages 
resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV 
interference caused by unauthorized modifications to this device. It is the 
responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the operation 
of this system if the correct operational voltage setting was not selected prior 
to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS 
CORRECT BEFORE USE.

International

http://support.aten.com

North America

http://www.aten-usa.com/product_registration

International

886-2-8692-6959

North America

ATEN TECH

1-888-999-ATEN

ATEN NJ

1-732-356-1703

UK

44-8-4481-58923

Summary of Contents for KM0032




























































































































































Reviews:

No comments