manualshive.com logo in svg

Altuscn KM0032, User Manual, Page: 11 / 155

Share
Download
Altuscn KM0032 User Manual Download Page 11

KM0032 / KM0532 / KM0932 User Manual

xi

About This Manual

This manual will help you get the most from your KM0032 / KM0532 / 
KM0932 system. It covers all aspects of installation, configuration and 
operation. The information provided in the manual is summarized below.

Overview

Chapter 1, Introduction, 

introduces you to the KM0032 / KM0532 / 

KM0932 System. Its purpose, features and benefits are presented, and its front 
and back panel components are described.

Chapter 2, Hardware Setup, 

provides step-by-step instructions for setting 

up your installation, and explains some basic operation procedures.

Chapter 3, Super Administrator Setup, 

explains the procedures that the 

super administrator employs to set up the KM0032 / KM0532 / KM0932 
network environment, and change the default password.

Chapter 4, Logging In, 

describes how to log in to the KM0032 / KM0532 / 

KM0932 from a local console and an internet browser.

Chapter 5, The User Interface, 

describes the layout and explains the 

components of the KM0032 / KM0532 / KM0932 user interface.

Chapter 6, Device Management, 

shows super administrators how to 

configure and control overall KM0032 / KM0532 / KM0932 operations.

Chapter 7, User Management, 

shows super administrators and 

administrators how to create, modify, and delete users and groups, and assign 
attributes to them.

Chapter 8, Port Access, 

describes the features and functions found under 

the Port Access tab and explains how to configure the options it provides.

Chapter 9, Log, 

explains how to use the log file utility to view the events that 

take place on the Matrix KVM Switch installation.

Chapter 10, Maintenance, 

shows how to backup and restore system 

configuration settings, and how to perform firmware upgrades.

Chapter 11, Console Port Operation, 

provides detailed information on 

accessing and operating the devices connected to the KM0032 / KM0532 / 
KM0932’s ports.

Chapter 12, RS-232 Port Operation, 

explains how to access and operate 

the devices connected to the KM0032 / KM0532 / KM0932 via a serial 
terminal connection.

An Appendix, 

provides technical and troubleshooting information.

Summary of Contents for KM0032




























































































































































Reviews:

No comments