manualshive.com logo in svg

Altuscn KM0032, User Manual, Page: 127 / 155

Share
Download
Altuscn KM0032 User Manual Download Page 127

Chapter 12. RS-232 Port Operation

115

Restrictions

Š

Only Super Administrators and Administrators can use this function. It is 
not available to ordinary users.

Š

Super Administrators or Administrators must log in through a serial 
terminal connection (such as HyperTerminal).

Š

A regular login connection (by any user) between the Console Module 
being used for the RS-232 login and the KM0532 / KM0932 must be 
established before the RS-232 login attempt.

Š

The user profile for the Super Administrator or Administrator logging in 
over the RS-232 port must exist in the database of the KM0532 / KM0932 
that the Console Module is attached to.

Š

Access rights:

Š

Super Administrators can access consoles and ports that have been 
given 

Super Administrator

, 

Administrator

, and 

User

 access rights.

Š

Administrators can only access consoles and ports that have been given 

Administrator

 and 

User

 rights.

Š

Switching of Console and KVM ports over the RS-232 connection 
depends on the access rights of the user who is logged into the Console 
Module via the Console Module port. Only the ports that the user has 
access rights to are available.

Summary of Contents for KM0032




























































































































































Reviews:

No comments