manualshive.com logo in svg

Altuscn KM0032, User Manual, Page: 2 / 155

Share
Download
Altuscn KM0032 User Manual Download Page 2

KM0032 / KM0532 / KM0932 User Manual

ii

FCC Information

This is an FCC Class A product. In a domestic environment this product may 
cause radio interference in which case the user may be required to take 
adequate measures.

This equipment has been tested and found to comply with the limits for a Class 
A digital device, pursuant to Part 15 of the FCC Rules. These limits are 
designed to provide reasonable protection against harmful interference when 
the equipment is operated in a commercial environment. This equipment 
generates, uses and can radiate radio frequency energy and, if not installed and 
used in accordance with the instruction manual, may cause harmful 
interference to radio communications. Operation of this equipment in a 
residential area is likely to cause harmful interference in which case the user 
will be required to correct the interference at his own expense.

RoHS

This product is RoHS compliant.

SJ/T 11364-2006

The following contains information that relates to China.

Summary of Contents for KM0032




























































































































































Reviews:

No comments