11
By purchasing this mixer, you have acquired a high-quality,
perfected and efficient machine.
Keep these instructions in a safe place for later reference.
Be sure that you have carefully read and fully
understood these instructions before you
start the machine, and adhere to all of them.
Contents
Meaning of the symbols
1
EC Declaration of Conformity
5
Symbols in the operating manual
11
Correct use
11
Residual risks
11
Operating times
11
Safety instructions
11
Start-up / switching on and off
12
Mixing 12
Transport 13
Storage 13
Cleaning 13
Maintenance 13
Repair 13
Malfunctions 13
Guarantee
13
Technical data
65
Ciricuit diagram
66
Spare parts
67
Symbols in the operating manual
Potential hazard or hazardous situation.
Failure to
observe this instruction may lead to injuries or cause
damage to property.
L
Important information on proper handling.
Failure to
observe this instruction may lead to faults.
User information.
This information helps you to use all
the functions optimally.
Assembly, operation and servicing.
Here you are
explained exactly what to do.
Correct use
•
The mixer can be used for both home and professional
applications for mixing mortar, bonding agents, plaster, pointing
material, filler, lime, plastic and granular material, epoxy resins,
refractory materials.
•
Proper use includes adherence to the operating, maintenance
and repair instructions of the manufacturer and observance of
the safety instructions they contain.
•
Any other utilisation counts as improper use, especially mixing
combustible or explosive materials (
fire and explosion
hazard) and use with foodstuffs. The manufacturer is not liable
for damages resulting from improper use:
Î
the user alone
shall bear the risk.
•
Unauthorised modifications on the device exclude a liability of
the manufacturer for damages of any kind resulting from it.
•
Only persons who are familiarised with the device and informed
about possible risks are allowed to prepare, operate and
service this device. Repair works may only be carried out by us
or by a customer service agent nominated by us.
Residual risks
Even if used properly, residual risks
can exist even if the
relevant safety regulations are complied with due to the design
determined by the intended purpose.
Residual risks can be minimised if the “Safety information” and the
“Intended usage” as well as the whole of the operating instructions
are observed.
Observing these instructions, and taking proper care, will reduce
the risk of personal injury or damage to the equipment.
•
Danger resulting from electric current, if improper connecting
leads are used.
•
Touching live parts when electric components are open.
In addition, in spite of all the precautionary measures taken, non-
obvious residual risks can still exist.
O
O
p
p
e
e
r
r
a
a
t
t
i
i
n
n
g
g
t
t
i
i
m
m
e
e
s
s
Please observe as well the regional regulations for noise
protection.
Safety instructions
Take note of the following instructions to protect
yourself and others from hazards and injuries.
•
Observe local accident prevention and safety regulations in the
work area.
•
Do not touch, inhale (dust formation) or swallow cement or
additional materials. Wear personal protective clothing (gloves,
protective glasses, dust mask) when filling or emptying the
mixing drum.
•
Set up and run the mixer on a solid, level
base (where it will not tip over).
•
Make sure that there is no danger of tripping near the mixer.
•
Be sure that there is enough light.
•
The operator is responsible for third parties in the work place.
•
Keep children away from mixer.
•
Persons younger than 16 years of age are not allowed to
operate the mixer.
•
Only use the mixer for the functions listed in "Correct use".
•
Do not alter the machine or any of its parts.
•
Replace defective or damaged parts on the machine
immediately.
•
Only start up the mixer if the protective devices are complete
and undamaged.
•
Fill or empty the mixing drum only when the motor is running.
•
Do not alter the revolution speed of the motor, since this
controls the safe maximum operating speed, and protects the
motor and all rotating parts against damage due to excess
speed.
•
Be absolutely sure to pull the plug before:
−
moving or transport
−
cleaning, maintenance or repair work
−
eliminating faults
