MN-35947
•
Rev 22
•
10/22
•
Combitherm® CT PROformance™ and CT Classic Series Installation Manual
•
47
CT Classic™ Start-Up Procedures
How To Turn On the Appliance
Before you begin
1. Turn on the exhaust hood.
2. Make sure that the water supply to the appliance is turned
on.
3. Make sure that the electrical power supply to the appliance
is turned on.
4. For gas appliances, make sure the gas supply valve is in
the open position.
Steps
1. Press the ON/OFF button
1
. The ON/OFF indicator glows
green.
NOTE:
If the appliance has a steam generator, the steam
generator fills with water and the appliance heats the
water to an initial temperature of 188°F (77°C).
NOTE:
To power off the appliance, press and hold the
Power button for 5 to 10 seconds to initiate the power
shutdown sequence to the oven.
How To Run a Cycle Test of the Appliance
Run the cycle test in combination cook mode
2. Press the combination cook mode button
2
.
3. Press the cook temperature button
3
.
4. If necessary, use the up arrow button
5
or the down arrow
button
9
to set the cooking temperature to 350°F (177°C).
5. Press the cook time button
4
.
6. Use the up arrow button
5
or the down arrow button
9
to
enter the cooking time (00:15:00).
7. Press the start/stop button
10
. The appliance begins
cooking.
8. Make sure that the appliance cycles correctly.
1. The appliance raises the cavity temperature to the set
temperature.
2. The appliance cycles off by itself when the set
temperature is reached.
3. The appliance idles until the cavity temperature drops
below the set temperature.
4. The appliance cycles back on by itself until the cavity
temperature again reaches the set temperature.
Allow the appliance to run through several cycles.
Cool down the appliance
1. Press the start/stop button
10
to stop the cooking process.
2. Press the cool down button
7
.
3. Use the up arrow button
5
or the down arrow button
9
to
set the cool down temperature to 110°F (43°C).
4. Open the appliance door.
NOTE:
The cook time field
8
diplays “dOOr” if the door is
not open.
NOTICE:
In the event of a power failure, the oven will not
operate.
C A U T I O N
Accumulations on the main burners of gas
appliances can result in firing out of normal
sequence. This delayed ignition creates an
alarmingly loud sound. If your appliance makes
an especially loud noise when starting up, shut
down the appliance and call a qualified and
trained service technician.
DANGER
Before starting the appliance, make certain you
do not detect the odor of gas.
If you smell gas:
• Shut off the gas supply immediately.
• Do not attempt to light any appliance.
• Do not touch any electrical elements.
• Extinguish any open flame.
• Evacuate the area.
• Use a telephone outside the property and
immediately contact your gas supplier.
• If unable to contact your as supplier, contact the
fire department.
5. Press the start/stop button
10
. The fan activates.
The cook time field
8
displays the cavity temperature.
The fan turns off when the cavity temperature matches the
set cool down temperature.
Run the cycle test in convection cook mode
1. Press the convection cook mode button
5
.
2. Repeat the cycle test steps for convection cook mode.
3. Cool down the appliance when the cycle test is complete.
1
2
3
4
5
10
7
6
8
9
5
