36
-EN
01GB05IVA106E.fm
ALPINE IVA-D106E 68-12118Z27-A (EN)
You can choose from 5 different colours for the font background.
Setting item: BASE COLOR
Setting contents: MODE 1 to MODE 5
Adjustment becomes necessary when the display position on the LCD
and the touch position on the touch panel do not match.
Setting item: SCREEN ALIGNMENT
Setting content:
/ RESET
1 Touch
[
]
of SCREEN ALIGNMENT.
The adjustment screen appears.
2 Accurately touch the
mark provided in the lower left
corner of the screen.
The screen changes to the adjustment screen.
3 Accurately touch the
mark provided in the upper right
corner of the screen.
This completes adjustment, and returns to the DISPLAY
setup mode screen.
•
If you have touched a location other than the
mark, touch
[RESET]
to restore the adjustment screen to the initial setting.
•
If you touch
[RETURN]
on the adjustment screen, no adjustment is
done and the DISPLAY setup screen is restored.
Visual EQ Setting Operation
1
After steps 1 and 2 in “Display Setup Operation”
(page 35) have been performed, touch
[
]
of
VISUAL EQ.
The VISUAL EQ screen appears.
2
Select a desired setting item by touching
[
]
or
[
]
.
Setting items:
VISUAL EQ
*
BRIGHT
TINT
*
CONTRAST
SHARP
*
COLOR
*
USER
MEMORY
*
* The setting is available in the visual source mode. (except navigation
screen)
3
Change the setting on the selected item by touching
its
[
]
or
[
]
.
4
Touch
[RETURN]
to return to the previous screen.
You can select a mode suitable for the subject image.
Setting item: VISUAL EQ
Setting contents: OFF (FLAT) / NIGHT M. / SOFT / SHARP /
CONTRAST / P-1 / P-2
•
To return to the initial setting after selecting any one of the setting
contents (NIGHT M. to CONTRAST) and adjusting a desired
brightness, picture tint, etc., set this function to OFF.
•
If your desired brightness, picture tint, etc., are adjusted after
selecting any one of the setting contents (NIGHT M. to CONTRAST),
“CUSTOM” is displayed.
Switching the Font Background Colour
Adjusting the Touch Panel
VISUAL EQ™
The following steps 1 to 4 are common operations to each
“Setting item” of VISUAL EQ setting. Refer to each section for
details.
Selecting the VISUAL EQ Mode (Maker’s
setting)
OFF (FLAT):
Initial Setting
NIGHT M.:
Suitable for movies in which dark scenes
frequently appear.
SOFT:
Suitable for CGs and animated films.
SHARP:
Suitable for old movies where images are not
clearly shown.
CONTRAST:
Suitable for recent movies.
P-1:
Recalls the VISUAL EQ mode being stored on
preset No.P-1 from “Storing VISUAL EQ”
(page 37).
P-2:
Recalls the VISUAL EQ mode being saved on
preset No.P-2 from “Storing VISUAL EQ”
(page 37).
01GB00IVAD106E.book Page 36 Tuesday, January 15, 2008 2:48 PM
