10
-EN
01GB05IVA106E.fm
ALPINE IVA-D106E 68-12118Z27-A (EN)
Initial System Start-Up
Immediately after installing or applying power to the unit, it should be
initialized. To do this, first, remove the detachable front panel. Behind
the front panel, to the left of the connector, there is a small hole. Using a
pencil or other pointed object, press the RESET switch mounted behind
this hole to complete the initialization procedure.
•
Any of the buttons does not function while the monitor is closing by
reset.
Turning Power On or Off
Some of this unit’s functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
Press
SOURCE
/
to turn on the unit.
•
The unit can be turned on by pressing any button on the unit except
OPEN/CLOSE/FLAT
and
(Eject).
2
Press and hold
SOURCE
/
for at least 2 seconds to
turn off the unit.
Opening/Closing the Monitor
1
Press
OPEN
.
The monitor beeps 3 times and opens the monitor
automatically.
2
Press and hold
OPEN (CLOSE)
for at least 2
seconds.
The monitor beeps 3 times and closes the monitor
automatically.
•
Opening/closing the monitor should never be performed manually. It
may cause a malfunction.
•
The monitor’s angle is set to 90 degrees at the factory. Depending on
the car, the monitor may hit the dashboard when opened. The
monitor’s angle can be adjusted and stored in memory so that the
monitor will not hit the dashboard when opening. For adjusting the
monitor, refer to “Adjusting the Monitor Angle” on page 35.
Even when the vehicle's battery power is removed, the adjusted
monitor angle remains stored in memory.
•
The IVA-D106E is a precision device. With gentle handling, its
unique capabilities can be enjoyed for a long time.
•
If the monitor touches anything while it is being opened (or closed),
the unit will stop opening (or closing) the monitor immediately.
Should this occur, remove the obstacle and press and hold OPEN for
at least 2 seconds again to lower the monitor.
•
When the movable monitor is opened, do not place any object on the
monitor and be careful not to bump or apply any pressure to the
monitor while it is open. This can cause damage to the mechanism.
•
In low ambient temperature conditions, the display may be dark for a
short period of time immediately after the power is turned on. Once
the LCD has warmed up, the display returns to normal.
•
For your safety, some operation of the unit cannot be performed
while the vehicle is in motion. In this case, first stop the vehicle and
engage the parking brake, then perform the operation.
Moving the Monitor to be Flat
When you want to operate some function on the car (air conditioner,
etc.) which is hidden by the raised monitor, use this function.
1
When the monitor is open, press
OPEN (FLAT)
.
The monitor moves to the flat position.
2
Press
OPEN (FLAT)
again.
The monitor returns to the previous angle.
•
The monitor returns to the previous angle 10 seconds after being
moved to the flat position.
•
If an excessive force is added to the monitor when the monitor is flat,
putting an object on the back of the monitor for example, it may
cause a malfunction.
Adjusting the Volume
Adjust the volume by turning the
Rotary encoder
.
Volume: 0 - 35
01GB00IVAD106E.book Page 10 Tuesday, January 15, 2008 2:48 PM
