34
-EN
01GB05IVA106E.fm
ALPINE IVA-D106E 68-12118Z27-A (EN)
Setting item: AUX IN
Setting content: OFF / ON / CAMERA / DVD / GAME / TV / DVB-T /
EXT. DVD / NAV.
•
OFF is not displayed when the optional DVD player or DVD changer
is connected. During SYSTEM setup, although the AUX name can be
changed, it is not displayed on the source selection screen.
•
When OFF is selected, the settings related to AUX cannot be changed
from this unit.
•
The selected name is displayed on the VISUAL and REAR selection
screen.
•
The selected source name is displayed instead of AUX source name.
Select SOURCE to switch to the guide function of each mode.
•
Only when an Alpine TV tuner is connected, you can operate the
displayed function guide from this unit.
•
If an optional Back-up camera is used by connecting to the AUX/
CAMERA IN Connector (Yellow) of the unit, make the “CAMERA”
setting. (Refer to “Connecting Video compatible iPod and Back-up
Camera at the same time” on page 71.)
•
When ON is set in “Setting the Rear Camera Input” (page 33) and
“VIDEO” is set in “Setting for iPod Connection” (page 33),
“CAMERA” is displayed.
After setting to ON in “Setting the AUX Mode,” this setting can be
carried out.
Setting item: AUX IN LEVEL
Setting content: LOW / HIGH
Outputs the picture/sound of the source selected on the IVA-D106E
connected to the rear monitor.
Setting item: AUX OUT
Setting content: OFF / ON
Setting item: BLUETOOTH IN
Setting contents: OFF / NAV. / ADAPTER
•
For details on Bluetooth operation, refer to the Owner's Manual of
the Bluetooth Box.
•
If a Bluetooth Box compatible with the Voice-Dial function is
connected, the Voice-Dial function can be used.
If a USB Adapter is to be used, set to ON.
Setting item: USB ADAPTER
Setting content: OFF / ON
•
If ON is set even when a CD changer is connected, the source name
on the SOURCE select screen will change from CD CHG to USB.
Setting item: VISUAL KEY
Setting content: VISUAL / NAV.
To connect an audio processor using the optical digital output, set to
“ON” by the following procedure.
Setting item: OPTICAL OUT
Setting contents: OFF / ON
•
Afterwards, set ACC to OFF once, then turn it ON again. The setting
of Digital Output is decided.
The setting is made if AUX+ is selected in “Setting for iPod
Connection” (page 33).
Setting item: AUX+ LEVEL
Setting contents: LOW / HIGH
Setting the AUX Mode
OFF:
AUX source is not displayed.
ON:
AUX source is displayed.
Adjusting the External Input Audio Level
LOW:
Decreases the external input audio level.
HIGH:
Increases the external input audio level.
Setting the Picture/Sound Output
ON:
The “REAR” item is displayed on the SOURCE selection
screen.
Touch
[REAR]
to change to the REAR selection screen,
and then touch the desired source. The selected source
picture is output on the rear monitor.
OFF:
The “REAR” item is not displayed on the SOURCE select
screen.
Setting the Bluetooth Connection
(Bluetooth IN)
OFF:
Select to ignore any external interrupts.
NAV.:
Select when an optional Portable Navigation is
connected.
Change voice line to RCA when TEL rings.
ADAPTER:
Select when an optional Bluetooth box is
connected.
When external interruption occurs, the display
changes to the TEL screen.
A source name of TEL on the source selection
screen is displayed.
Setting the USB Adapter to ON/OFF
OFF:
Does not display the USB source name on the SOURCE
select screen.
ON:
Displays the USB source name on the SOURCE select
screen.
Setting the VISUAL Button
NAV.:
Switches directly to the navigation screen by touching
[VISUAL]
on the main source screen or pressing
VISUAL on the unit. (Only when an Alpine optional
RGB Navigation is connected.)
VISUAL:
Recalls the VISUAL Selection screen by touching
[VISUAL]
on the main source screen or pressing
VISUAL on the unit.
Setting the Digital Output
Setting the AUX+ Level
LOW:
Decreases the external input audio level.
HIGH:
Increases the external input audio level.
01GB00IVAD106E.book Page 34 Tuesday, January 15, 2008 2:48 PM
