35
-EN
01GB05IVA106E.fm
ALPINE IVA-D106E 68-12118Z27-A (EN)
Display Setup Operation
1
Touch
[SETUP]
on the main source screen.
The SETUP selection screen is displayed.
2
Touch
[
]
of DISPLAY SETUP.
The DISPLAY setup screen appears.
3
Touch
[
]
or
[
]
etc. of the desired item to change
its setting.
Setting items:
TILT
*
1
/ OPEN/CLOSE
*
1
/ VISUAL EQ / DIMMER /
DIMMER LOW LEVEL / BACKGROUND /
AUTO BACKGROUND / DATA DOWNLOAD
*
2
/
BASE COLOR / SCREEN ALIGNMENT
*
1
These functions are adjustable while driving.
*
2
Refer to “Downloading the BACKGROUND data” (page 37).
4
Touch
[RETURN]
to return to the previous screen.
•
Immediately after changing the settings of Display Mode (While the
system is writing data automatically) do not turn the ignition key
(engine key) to OFF.
Otherwise, the settings may not be changed.
Adjust the monitor’s angle (between 40 and 105 degrees) for optimum
visibility.
Setting item: TILT
Setting range: 10 adjustable angles are available.
•
If the monitor touches an obstacle, remove the obstacle.
•
The screen colour will vary when viewed at certain angles. Adjust the
screen angle for the best viewing position.
•
If the voltage of the vehicle’s battery power is low, the screen may
blink when the screen angle is changed. This is not a malfunction.
Setting item: OPEN / CLOSE
Setting content: MANUAL / FULL / CLOSE
Backlighting is provided by a fluorescent light built into the liquid
crystal panel. The illumination control adjusts the brightness of the
backlighting based on the car ambient lighting for easier viewing.
Setting item: DIMMER
Setting content: OFF / ON / AUTO
•
When ON or AUTO is set, the setting is also applied for the button
lighting in “Adjusting the Dimmer of Button Lighting at Night”
(page 32).
You can adjust the brightness of the backlight (LOW). This function
could be used, for instance, to change the screen brightness while
travelling at night.
Setting item: DIMMER LOW LEVEL
Setting content: -15 to +15
You can adjust the level between -15 and +15.
You have a choice of background textures you can set.
Setting item: BACKGROUND
Setting content: MODE1 / MODE2
•
This operation can be carried out after removing the disc from the
unit or when playback of the disc has stopped.
•
Wallpapers downloaded from “Downloading the BACKGROUND
data” (page 37) are recalled.
•
When you select a source other than the built-in disc on this unit, and
the built-in disc is selected on the rear monitor connected to the unit,
background textures cannot be displayed on the unit.
•
When an error message is displayed (ERROR, etc.), background
textures selected by this setting cannot be displayed on the unit.
The background texture will automatically change each time the
ignition key is turned off and turned back on again.
Setting item: AUTO BACKGROUND
Setting content: OFF / ON
•
Wallpapers downloaded from “Downloading the BACKGROUND
data” (page 37) are recalled.
DISPLAY Setup
The Parking Brake must be engaged to access the DISPLAY
mode screen. Attempting to access this screen while driving will
display the warning-CAN’T OPERATE WHILE DRIVING.
The following steps 1 to 4 are common operations to each
“Setting item” of DISPLAY Setup. Refer to each section for
details.
Adjusting the Monitor Angle
Setting Automatic Opening/Closing of the
Monitor
MANUAL:
The monitor is manually opened or closed by
pressing
OPEN
.
FULL:
The monitor automatically opens or closes when the
ignition key is turned to the “ACC” or “ON/OFF”
position.
CLOSE:
The monitor automatically closes when the ignition
key is turned OFF.
Setting the Brightness of the Backlighting
OFF:
Deactivate Auto Dimmer mode to keep the background
illumination of the monitor bright.
ON:
Keep the background illumination of the monitor dark.
AUTO:
Adjust the brightness of the background illumination of
the monitor automatically to the brightness of the car
interior.
Adjusting the Minimum Level of Backlight
Switching Background Textures
Setting Automatic Background Textures
OFF:
Turn off the Auto Background Texture Scroll mode.
ON:
Turn on the Auto Background Texture Scroll mode.
The background textures will scroll when the ignition key
is turned off once and turned back on again as follows:
MODE1
MODE2
01GB00IVAD106E.book Page 35 Tuesday, January 15, 2008 2:48 PM
