26
-EN
01GB05IVA106E.fm
ALPINE IVA-D106E 68-12118Z27-A (EN)
Internal MP3/WMA/AAC/DivX Player/external MP3-
compatible DVD Player/Changer Mode
1 The folder list screen appears.
Select a desired folder and then touch
[
]
.
(
[
]
appears only when a file is present in the selected
folder.) The file list screen is displayed.
2 Touch
[
]
of a desired file name.
The selected file will be played back.
Rear Selection Function
While listening to the radio or other audio source, at the same time,
pictures in a disc inserted in the IVA-D106E can be enjoyed in the rear
monitor. However, only pictures are output, not sound.
1
Touch
[SOURCE]
on the main source screen.
The source selection screen is displayed.
2
Touch
[REAR]
.
Rear Select display appears.
•
This function cannot be used when “Setting the Picture/Sound
Output” (page 34) is set to OFF in the SYSTEM SETUP.
•
If
[MAIN]
on the Rear Select screen is touched, the screen
changes to the main source screen.
3
Touch your desired source such as visual (auxiliary
input, built-in DVD, etc.) to select.
•
Touch
[OFF]
to cancel the rear entertainment function.
•
When the “Setting the AUX Mode” (page 34) is set to OFF, the
auxiliary source is not displayed.
Switching Display Modes
While your vehicle is parked, touch
[WIDE]
on the visual
source screen or press
BAND
on the unit.
Each touch changes the display modes as follows:
In Mode 1 (Wide), the monitor displays a normal picture wider to
fit in a wide-screen monitor by evenly stretching out the picture
horizontally.
In Mode 2 (Cinema), the monitor displays a normal picture by
stretching out the picture horizontally and vertically. This mode is
good for displaying a cinema type picture at the 16 : 9 ratio.
In Mode 3 (Normal), the monitor displays a normal picture at the
centre of the screen with a vertical black band at each side.
•
To playback a DVD-Audio disc, set “VCAP” in “Setting the DVD-
Audio Playback Mode” (page 30).
Switching the Visual Source Only
(Simultaneous Function)
You can watch the video portion of another source while listening to the
current source.
1
Touch
[VISUAL]
on the audio source screen.
The VISUAL selection screen appears.
2
Touch desired visual source.
The visual source is switched to the selected one.
1
Press
VISUAL
.
2
Touch
[NORMAL]
.
The simultaneous function is cancelled.
•
To apply the setting, set to VISUAL in “Setting the VISUAL Button”
(page 34).
•
If a DVD player is connected, you can receive the DVD picture.
DVD changer (DHA-S680E) is connected:
Press and hold
V.OUT
on the remote control supplied with the DVD
player or DVD changer for more than 2 seconds. The picture of the
DVD will be output.
The DVA-5210 or DHA-S690 is connected:
Press
V.OUT
on the remote control (included with the DVA-5210 or
DHA-S690) to output the DVD picture.
•
The simultaneous function cannot be used when the Audio source is
in the navigation mode.
When NAV. is set in “Setting the VISUAL Button” (page 34), only the
navigation screen can be recalled.
•
When the “Setting the AUX Mode” (page 34) is set to OFF, the
auxiliary source is not displayed.
•
Touch
[
]
to play back the folder directly.
MODE 1
MODE 2
MODE 3
MODE 1
(WIDE)
(CINEMA)
(NORMAL)
(WIDE)
®
Cancelling the Simultaneous Function
01GB00IVAD106E.book Page 26 Tuesday, January 15, 2008 2:48 PM
