45
-EN
01GB05DVA9861.fm
ALPINE DVA-9861 68-04123Z61-A (EN)
An iPod™ can be connected to the DVA-9861 by using the proprietary
ALPINE FULL SPEED™ Connection Cable (KCE-422i). When the
DVA-9861 is connected by using the cable, the controls on the iPod™
are not functional.
About iPod™ usable with this unit
The unit can be used with third generation and above iPod™, iPod™
photo, iPod™ mini or iPod™ nano. iPod™ Shuffle cannot be used,
however.
•
Touch wheel or scroll wheel type iPods without the dock connector
cannot be connected to the unit.
•
The unit can be used with the following iPod versions. Correct
function of earlier versions cannot be guranteed.
Third generation iPod: Ver. 2.3
Forth generation iPod: Ver 3.0.2
iPod photo: Ver.1.1
iPod mini: Ver. 1.3
iPod nano: Ver. 1.0
•
The unit cannot be used with the software versions earlier than 2005-
02-22. For details about “iPod Software Update,” refer to the iPod
Instruction Manual.
Playback
1
Press
SOURCE/POWER
to switch to the IPOD
mode.
2
Press
or
to select the desired song.
3
To pause playback, press
/
.
Pressing
/
again will resume playback.
•
If a song is playing on the iPod when it is connected to the
DVA-9861, it will continue playing after the connection.
Searching for a desired Song
An iPod can contain hundreds of songs. By keeping these songs
organized in playlists, the DVA-9861 can use these to ease song
searches.
1
Press
to activate the search selection mode.
2
Turn the
Rotary encoder
to select the PLAYLIST
search mode, then press
.
PLAYLIST
ARTIST
ALBUM
SONG
PLAYLIST
3
*
1
Turn the
Rotary encoder
to select the desired
Playlist.
4
Press /
.
The selected Playlist is played back.
To search for a song in the selected playlist
1 After selecting the playlist in step 3
*
1
, press
to change
to the song search mode of the selected playlist.
2 Turn the
Rotary encoder
to select a song and press
MODE
.
The selected song is played back.
•
While in the search mode, if you press and hold
for at least 2
seconds, or no operation is performed for 10 seconds, the search
mode is canceled.
•
While in the search mode, pressing
FUNC.
will return to the previous
mode.
•
All songs in the iPod are played back by selecting the stored “iPod
name” in step 3*
1
.
•
Playlist search cannot be made during M.I.X. play.
•
In the search mode, you can jump to an assigned position by pressing
any one of buttons 1 through 6 for quick search purposes. For
details, refer to “Direct Search Function” (page 46).
•
“NO SONG” will be displayed if there are no songs in the selected
playlist in the PLAYLIST search mode.
1
Press
to activate the search selection mode.
2
Turn the
Rotary encoder
to select the ARTIST
search mode, then press
.
PLAYLIST
ARTIST
ALBUM
SONG
PLAYLIST
3
*
2
Turn the
Rotary encoder
*
to select the desired
Artist.
4
Press /
.
The selected Artist song is played back.
To search for an album of the selected artist
1 After selecting the artist in step 3
*
2
, press
to change
to the album search mode of the selected artist.
2
*
1
Turn the
Rotary encoder
*
to select an album.
3 Press the
/
to play back all songs of the selected
album.
iPod™ (Optional)
Return to the beginning of the current song:
Press .
Fast backward:
Press and hold
.
Advance to the beginning of the next song:
Press .
Fast forward:
Press and hold
.
Rotary
encoder
MODE
4 5
TITLE
/
SOURCE/
POWER
6
Buttons
1 through 6
FUNC.
Searching by Playlist
Searching by artist name
01GB00DVA9861.book Page 45 Tuesday, December 6, 2005 3:41 PM
