11
Subject to change without notice.
83054800bUK – Translation into English of the original German operating manual ait-deutschland GmbH Subject to change without notice.
Subject to change without notice.
83054800bUK – Translation into English of the original German operating manual ait-deutschland GmbH
PUSH-IN FAN
The fan can be pushed approx. 10 cm into the housing to
enable the unit to be transported in narrow basement
rooms and through narrow doors or corridors:
ATTENTION
Only push the fan into the housing for transport
purposes and pull it back out of the housing
immediately after transport.
Remove the lower facing panel on the fan side and
remove it from the unit. To do this, undo the quick-
release screws. Turn through 90° to the left…
1 Quick-release screws
2 Lower facing panel
Pull the lower facing panel upwards and outwards at an
angle, lift out and put in a safe place...
Remove the screws in the underside of the upper
facing panel…
Lift up the facing panel at an angle, unhook it and put it
in a safe place…
Then remove the side facing panels from the unit too
and put them in a safe place…
At the fan, thread in the two guide rods supplied with
the unit through the metal tab and fan…
Then, on both sides, hook the guide rods in the key-
hole perforation of the top metal tab inside the unit…
