15
Subject to change without notice.
83054800bUK – Translation into English of the original German operating manual ait-deutschland GmbH Subject to change without notice.
Subject to change without notice.
83054800bUK – Translation into English of the original German operating manual ait-deutschland GmbH
Repeat procedure – at the air outlet side.
NOTE.
Do not forget:
After the air ducts have been fixed onto the heat
pump, seal off the opening that still exists between
the wall penetration and the air duct by attaching
the waterstop tape supplied.
NOTE.
Use suitable means to fix the air ducts to the
ceiling.
INSTALLING THE FRAME TRIM
Screw the frame trim onto the wall penetration on the air
inlet and air outlet side.
NOTE.
The frame trim does not fulfil any technical
function; it is merely for establishing a visually
attractive transition with the wall surface.
INSTALLING THE WIRE MESH AND THE WEATHER / RAIN
LOUVRE
Remove the wire mesh and weather / rain louvre
including the installation frame and fixing materials
from the relevant box…
From the outside of the building, insert the installation
frame in the wall penetration of the air inlet side and
screw tight…
8 x
Insert the wire mesh in the installation frame…
Position the weather / rain louvre on the installation
frame in the wall penetration and screw on…
