Alpha ESS ES-Alpha-Smile 5-10KWH-v2 Installation, Operation & Maintenance Manual Download

Page: 86 / 113

COMMISSIONING

field, which has six fixed options (NSW, QLD, VIC, SA, TAS, WA). If SA is selected for
Region, two more fields are added which are Agent and NMI.

Fields that are not marked "optional" need to be filled in.

Click "Next" and go to Section 10.3 if the WiFi has not been configured.

9.5.

Check the Running State On-line

If you have completed commissioning as described in section 10.3.2, please ignore this

section.

You can also commission the system after WiFi configuration.

Please make sure the PV switch and battery breakers and all the breakers connecting

to the product are ON.

9.5.1.

Check the Charging Function of the Product



To make sure the system is installed and operating correctly, please set the
system to “Charging/Discharging Setting” by following the instructions below.

Step1

First click “

Function

” on the right-side bottom corner of the Home

page.

Then click “

Charging and discharging setting

”

Summary of Contents for ES-Alpha-Smile 5-10KWH-v2


















































































































Search results

Summary of Contents for ES-Alpha-Smile 5-10KWH-v2

Reviews:

Related manuals for ES-Alpha-Smile 5-10KWH-v2

Brands by name

Popular brands

Alpha ESS ES-Alpha-Smile 5-10KWH-v2, Installation, Operation & Maintenance Manual

Search results

Summary of Contents for ES-Alpha-Smile 5-10KWH-v2

Reviews:

Related manuals for ES-Alpha-Smile 5-10KWH-v2

Brands by name

Popular brands