ITA
ENG
FRA
ESP
DEU
POR
6-1624050 rev.12 14/11/2012 Pag 8 di 9
3.4.5 Installation adapter for bascule doors
A
B
C
A
A
B
C
D
E
a
b
If the door which is being installing is a bascule with counterpoises, it is
necessary to utilize the apposite accessories provided by request
(fig.30).
figure 30
In case of bascule door with counterpoise, it is necessary to provide that
the guide is mounted inclined . Particularly between the point in which the
drive is fixed to the motor (point a) and the point in which it is fixed to the
clamp on the architrave (point b), they must be 4 cm. (fig.31).
figure 31
Fix the bracket A of the adaptor bow on the superior board of the
door. The centre of the bracket must correspond with the centre of the
drive.
Fix the point B of the curved branch to the door by using a clamp or
something similar according to the structure of the door. Check that
the points A and B be stable and do not involve deformations or
breakings to the door.
Fix the point B of the adaptor bow on the door, having care that
the bow is plumb.
Connect the clamp fixed to the carriage for bascule to the adaptor
bow on the point C, in a way that the distance of the points D-E is
included between 50 and 70 mm.
figure 32
figure 33
figure 34
figure 35
