manualshive.com logo in svg

Allied Stingray, Technical Manual

Share
Download
Allied Stingray Technical Manual Download Page 46

FireWire

STINGRAY Technical Manual

 

V4.4.2

46

Operating system support

Operating system

1394a

1394b

Linux

Full support

Full support

Apple Mac OS X

Full support

Full support

Windows XP

With SP2 / SP3 the default speed for 1394b is S100 (100 Mbit/s). A 
download and registry modification is available from Microsoft to 
restore performance to either S400 or S800.

http://support.microsoft.com/kb/885222

Alternatively use the drivers of SP1 instead: Microsoft Windows XP SP2 
and XP SP3 do not correctly support IEEE 1394b FireWire adapters. 
Downgrading the Windows XP FireWire bus driver to the SP1 version is 
required for IEEE 1394a or 1394b FireWire cameras to work correctly 
on an IEEE 1394b adapter, or if you want to use a 1394b FireWire cam-
era with an IEEE 1394a adapter.

Or: use either the driver of the 

AVT Universal Package/

AVT FirePackage 

or install the driver provided with the 

AVT 1394 Bus 

Driver Package

. Both drivers replace the Microsoft OHCI IEEE 1394 

driver, but the second is 100% compliant to the driver of Microsoft. 
This means, applications using the MS1394 driver will continue to 
work.

Windows Vista

Full support

Windows Vista incl. SP1/SP2 
supports 1394b only with S400.

Use either the driver of the 

AVT Universal Package/
AVT FirePackage 

or install the 

driver provided with the 

AVT 1394 Bus Driver Package

. 

Both drivers replace the 
Microsoft OHCI IEEE 1394 driver, 
but the second is 100% compli-
ant to the driver of Microsoft. 
This means, applications using 
the MS1394 driver will continue 
to work.

Windows 7

Full support

Full support

 Table 7: FireWire and operating systems

www

For more information see 

AVT Software Selector Guide:

http://www.alliedvisiontec.com/emea/support/
downloads/software.html

Summary of Contents for Stingray






































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands