manualshive.com logo in svg

Allied Stingray, Technical Manual

Share
Download
Allied Stingray Technical Manual Download Page 27

Introduction

STINGRAY Technical Manual

 

V4.4.2

27

More information

For more information on hardware and software read the following:

•

Hardware Installation Guide 

describes the hardware installation proce-

dures for all 1394 AVT cameras (Dolphin, Oscar, Marlin, Guppy, Pike, 
Stingray). Additionally you get safety instructions and information 
about camera interfaces (IEEE1394a/b copper and GOF, I/O connectors, 
input and output).

Caution

This symbol highlights important instructions. You have 
to follow these instructions to avoid malfunctions.

www

This symbol highlights URLs for further information. The 
URL itself is shown in blue.

Example:

http://www.alliedvisiontec.com

Note

You find the Hardware Installation Guide here:

http://www.alliedvisiontec.com/emea/support/down-
loads/product-literature.html

There is no product CD.

www

All software packages (including documentation and 
release notes) provided by AVT can be downloaded at:

http://www.alliedvisiontec.com/emea/support/down-
loads/software.html

There is no product CD.

Summary of Contents for Stingray






































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands