manualshive.com logo in svg

Allied Stingray, Technical Manual

Share
Download
Allied Stingray Technical Manual Download Page 12

Introduction

STINGRAY Technical Manual

 

V4.4.2

12

Introduction

This 

STINGRAY Technical Manual

 describes in depth the technical specifica-

tions, dimensions, all camera features (IIDC standard and AVT smart fea-
tures) and their registers, trigger features, all video and color formats, band-
width and frame rate calculation.

For information on hardware installation, safety warnings, pin assignments 
on I/O connectors and 1394b connectors read the 

Hardware Installation 

Guide

.

Document history

Note

Please read through this manual carefully.

We assume that you have read already the Hardware 
Installation Guide and that you have installed the hard-
ware and software on your PC or laptop (FireWire card, 
cables).

Version

Date

Remarks

V2.0.0

31.03.08

New Manual - RELEASE status

V2.1.0

23.05.08

New CAD drawings due to new flange in Chapter 

Camera dimen-

sions

 on page 75ff.

Added Appendix: Chapter 

Sensor position accuracy of AVT GigE 

cameras

 on page 346

Added direct fiber technology in Chapter 

STINGRAY cameras

 on 

page 29

Added fiber cameras (1 x copper, 1 x GOF) and fiber power con-
sumption in all tables in Chapter 

Specifications

 on page 50ff.

Added Chapter 

Pulse-width modulation (Stingray housing and 

Stingray board level models)

 on page 110ff.

Added Chapter 

Horizontal mirror function

 on page 133ff.

Added Chapter 

Shading correction

 on page 134

to be continued on next page

 Table 1: Document history

Summary of Contents for Stingray






































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands