manualshive.com logo in svg

Allied Stingray, Technical Manual

Share
Download
Allied Stingray Technical Manual Download Page 127

Description of the data path

STINGRAY Technical Manual

 

V4.4.2

127

To configure this feature in control and status register (CSR):

Register

Name

Field

Bit

Description

0xF0F0081C

SHUTTER

Presence_Inq

[0]

Presence of this feature:

0: N/A

1: Available

Abs_Control

[1]

Absolute value control

O: Control with value in the 

Value

 field

1: Control with value in the 

Absolute

 value 

CSR

If this bit=1, the value in the 

Value

 field will 

be ignored.

---

[2..4]

Reserved

One_Push

[5]

Write 1: begin to work (self-cleared after oper-
ation)

Read:

1: in operation

0: not in operation

If A_M_Mode = 1, this bit will be ignored.

ON_OFF

[6]

Write: ON or OFF this feature

Read: read a status

0: OFF

1: ON

A_M_MODE

[7]

Write: set mode

Read: read current mode

0: MANUAL

1: AUTO

---

[8..19]

Reserved

Value

[20..31]

Read/Write Value

This field is ignored when writing the value in 
Auto or OFF mode.

If readout capability is not available, reading 
this field has no meaning.

 Table 42: CSR: 

Shutter

Note

Configuration

To configure this feature in an advanced register: See 

Table 145: Advanced register: Auto shutter control

 on page 

320.

Summary of Contents for Stingray






































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands