Allied Stingray, Technical Manual

Page: 20 / 357

Introduction
STINGRAY Technical Manual V4.4.2
20
continued from last page
V4.2.0
[continued]
28.05.09
[continued]
Stingray update round (SUR):
• Only GOF models: new LED signals (asynchronous traffic
and signal detect) in Table 21: LEDs showing normal condi-
tions on page 99
• Stingray F-504 cameras are also available with 64 MByte
internal FIFO memory (instead of 32 MByte):
– Table 19: Specification STINGRAY F-504B/C (fiber) on
page 64 and
– Table 55: FIFO memory size on page 173
• All Stingray models: added defect pixel correction :
– Chapter Defect pixel correction on page 144
– Table 143: Advanced register: Defect pixel correction on
page 317
• All Stingray models: added low noise binning mode :
– Table 159: Advanced register: Low noise binning mode
on page 333
• All Stingray models: added software trigger :
– In inquiry register 530h on page 286 added:

Value_Read_Inq [7],

Trigger_Source0_Inq [8] and

Software_Trigger_Inq [15]
– In inquiry register 62Ch on page 288 added:

Software_Trigger
• All Stingray models: added disable LEDs function:
– Chapter Software feature control (disable LEDs) on
page 340
• All Stingray GOF models : added two new LED signals
– Only GOF: asynchronous traffic on page 99
– Only GOF: GOF signal detect on page 99
• All Stingray models: added debounce feature :
– Advanced register summary 0xF1000840 on page 300
– Advanced register summary 0xF1000850 on page 300
– Advanced register summary 0xF1000860 on page 300
– Advanced register summary 0xF1000870 on page 300
– Chapter Debounce on page 197f.
– Table 65: Advanced register: Debounce time for input
ports
on page 198
V4.2.0
[continued]
28.05.09
[continued]
Stingray update round (SUR):
[continued]
• WaitingForTrigger signal for outputs
– Table 28: Output signals on page 105
– Output mode: trigger ID 0x0A on page 108
– Figure 50: Output impulse diagram on page 109
to be continued on next page
Version Date Remarks
Table 1: Document history