Camera interfaces
GUPPY Technical Manual
V4.0.1
98
Camera interfaces
In addition to the two status LEDs (see Chapter
Status LEDs
on page 103),
there are two jacks located at the rear of the camera.
•
The 8-pin camera I/O connector provides a variety of control input and
output lines.
•
The IEEE 1394 connector with lock mechanism provides access to the
IEEE 1394 bus and thus makes it possible to control the camera and
output frames.
IEEE 1394 port pin assignment
The IEEE 1394 plug is designed for industrial use and has the following pin
assignment as per specification:
Figure 43: Rear view of camera
Figure 44: IEEE 1394 connector
Status LEDs
8-pin camera
IEEE 1394 connector
I/O connector
Yellow
(S2)
Green
(S1)